BLZLZ - LUBRIMATIC 11315

  • MSDS: BLZLZ
  • Manufacturer: WITCO
  • Product Name: LUBRIMATIC 11315
  • National Stock Number: 9150-00N017634
Product Identification

Product ID:LUBRIMATIC 11315
MSDS Date:02/04/1991
FSC:9150
NIIN:00N017634
MSDS Number: BLZLZ

Responsible Party
WITCO
1400 S HARRISON
OLATHE, KS 66061
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 913-782-5800

Cage: 62992

Contractor
WITCO
OLATHE, KS 66061 US

Telephone: 913-782-5800

Cage: 62992

Ingredients

PETROLEUM HYDROCARBON-SOLVENT MIXTURE (PLUS ADDITIVES)


LENGTH FACESHIELD TO GOGGLES , IF HANDLED HOT.

RTECS: 9999999ZZ


A BLOODLESS PUNCTURE WOUND. MATL INJECTED IN

RTECS: 9999999ZZ


HRS THE PATIENT MAY EXPERIENCE SWELLING,

RTECS: 9999999ZZ


TREATMENT BY A SURGICAL SPECIALIST IS RECOMMENDED.

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CHRONIC: NONE WHEN USED WITH GOOD
PERSONAL HYGIENE PRACTICES. MAY OTHERWISE CAUSE SKIN AND EYE
IRRITATION UPON PROLONGED OR REPEATED CONTACT. ACUTE: NO DATA
AVAILABLE. NOTE: HIGH VELOCITY INJECTION UN DER THE SKIN MAY RESULT
IN SERIOUS INJURY. SEE FIRST AID PROCEDURES.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: IMMED FLUSH WITH LRG QTYS OF WATER FOR AT LEAST 15 MIN
& CALL MD. SKIN: REMOVE EXCESS WITH CLOTH OR PAPER & WASH AREA
THORO W/SOAP & WATER. FOR HIGH PRESS INJECTION UNDER SKIN SEE MD
IMMED. INHA L: REMOVE EXPOSED PERSON TO FRESH AIR IF DISCOMFORT IS
EXPERIENCED WHILE HANDLING HOT PROD. INGEST: CALL MD IMMED. NOTE TO
MD: HIGH VELOCITY INJECTION UNDER SKIN MAY RESULT IN SERIOUS (SUPP
DATA)

Fire Fighting

Flash Point Method:COC
Flash Point:>320F,>160C
Extinguishing Media:DRY CHEMICAL, WATERFOG, CO*2, FOAM, SAND/EARTH.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . DENSE SMOKE. DO NOT USE WATER EXCEPT AS FOG.
Unusual Fire/Explosion Hazard:DENSE SMOKE. WATER MAY CAUSE FROTHING.
CLOSED CONTAINERS EXPOSED TO FIRE MAY BE COOLED WITH WATER.

Accidental Release

Spill Release Procedures:TRANSFER BULK OF MIXTURE INTO ANOTHER
CONTAINER. ABSORB RESIDUE WITH AN INERT MATERIAL SUCH AS EARTH,
SAND, OR VERMICULITE. SWEEP UP AND DISPOSE AS SOLID WASTE IN
ACCORDANCE WITH LOCAL, STATE AND FEDE RAL REGULATIONS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED UNTIL READY FOR
USE.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCEN .
Ventilation:NONE
Protective Gloves:NONE
Eye Protection:CHEM WORK GOGG. MAY ADD FULL (ING 2)
Other Protective Equipment:NONE
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PRODS: DEPENDING UPON DECOMP CONDITIONS. PO*X FROM BURNING.
SO*X. FIRST AID PROC: INJURY. IF LEFT UNTREATED THE AFFECTED AREA
IS SUBJECT TO INFECTION, DISFIGUREMENT, LACK OF BLOOD CIRCULATI ON
& MAY REQ AMPUTATION. WHEN DISPENSEDBY HIGH PRESS EQUIP THIS MATL
CAN EASILY PENETRATE SKIN & LEAVE (ING 3)

Chemical Properties

Spec Gravity:0.935
Solubility in Water:NEGLIGIBLE AT 25C
Appearance and Odor:BLACK SEMI-SOLID GREASE, WITH MINERAL OIL ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS SUCH AS HYDROGEN PEROXIDE, BROMINE, AND CHROMIC ACID.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:OXIDES OF BARIUM, OXIDES OF ANTIMONY,
CO & CO*2 FROM BURNING. ZINC OXIDE, SULFUR DIOXIDE/HYDROGEN
SULFIDE, (SUPP DATA)

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.